Springs
Compression
Springs
The most common compression spring is a
straight cylindrical spring, we can also provide, barrel, conical and hourglass
compression springs. The pitch or spacing between coils in the compression spring
range can be held as constant or variable, all depending on your requirements.
Tension
Springs
We supply a large range of tension springs
with the range of manufacturing equipment available, with a large variety of ends
such as single hooks, double hooks, extended hooks, hooks on the side, swivel hooks,
etc. the hooks again relates back to the function and the design of the product.
Torsion
Springs
Torsions springs has a never ending range
the products having so many variations within each item, but these are a simple
products to produce on the high grade manufacturing equipment available to supply
the product from, we can supply a extremely large range of products, a few examples
such as, straight torsion, double torsion, hinge ends, short hook ends, but as mentioned
above the type of spring all relates back to the function and your current product
design.
Constant
Force Springs
Constant force springs may also be known as clock springs, clock forms, power forms
or spiral torsion springs, these particular products can be produced from round
material but you shall find a large range of these products shall be produced from
steel strip material.
Production
of Compression, Tension, Torsion, Clock form Springs
We have a wide range of options to supply
you with your finished product as below Prototypes or breakdown requirements These
requirements shall be produced in a product development area; this area is completely
set up for product development and breakdown requirements. The production volume
for this area ranges between 1 to 50 parts as required.
Low to
high volume production requirements
The function of this area is to supply
products of a volume of 50 parts and upwards, we have production capability to supply
up to and over 1,000,000 parts per day of certain products.
Wire
Diameter
In the production of compression springs
we have the ability to supply a large range of products that fall within the
standard wire sizes range which shall start at .15mm and go all the way up to 70mm in material
thickness, the supply of these products shall relate to the material stock level
at the time of order placement.
Material
Type
The most common materials used in the production of springs are spring steels this
does come in a range of grades all depending on your product requirements, this
shall be looked into further after reviewing your drawing or sample provided.
Stainless steel grades 304 and 316 shall
be stock lines and other grades shall be sourced if required. We also have a large
range of other material types available, if your material requirement is not in
the stock range, the product shall then be sourced if available.
Surface
Finish Requirements
We shall manage and supply all products to your surface finish requirements we can
cover a large range of surface finish.
This is just a few examples of the surface finishes available for your products.
• Zinc Plating (Clear, Black or Gold)
• Powder Coating (Large Range of Colours)
• Electro polishing
• Chrome Plating
• Colour Identification
|